パウダー付き ラテックス手術用手袋

パウダー付き ラテックスサージカルグローブ

製品の特徴

1.天然ゴムラテックス製。

2.優れたハンドフィッティング。

3.質感あり、装着が便利で、快適で、安心にグリップできます。

4. ISO 13485品質基準品。

  • 製品の内容
  • 製品の包装
  • 製品認証
Product  Description Powdered Latex Surgical Gloves, anatomic shape, beaded cuff, textured surface in the grip area, with size embossed, sterile
 Size   6.0, 6.5, 7.0, 7.5, 8.0, 8.5 
 Overal Length   290 +/- 5mm / 305+/-5mm
 Physical  Propetry                         Before Aging After Aging
 Tensile Strength 24Mpa    18Mpa (min)
 Stress at 500% elongation     5.5Mpa (MAX)                                                 
 Ultimate elongation 750% 560% (min)
 Sampling  Plan  ISO 2859, Manufactured in compliance with current GMP requirement. 
  AQL Inspection Level 
 Pinhole 1.5 G-1
 Major 2.5 G-1
 Minor 4.0 G-1
 Physical property&Dimensions  4.0  S-2 
 Reference Document: ASTM D3577-06

 

 

  1. This product contains nature rubber latex that may cause allergic reaction in some hypersensitive individual users.
  2. After donning, remove powder by wiping gloves thoroughly with a sterile wet sponge. sterile wet towel or other effective method
  3. Should be stored at goods shelf. 20cm off the floor. in a dry and well ventilated areas.
  4. Tempertures below 30℃(86℉) and 65% humidity.
  5. Aviod direct sunlight, heat, and high temperatures.
  6. Aviod direct lighting, heating, and electrical equipment.
  7. Avoid exposure to UV light Ozone.
  • 製品の内容

    Product  Description Powdered Latex Surgical Gloves, anatomic shape, beaded cuff, textured surface in the grip area, with size embossed, sterile
     Size   6.0, 6.5, 7.0, 7.5, 8.0, 8.5 
     Overal Length   290 +/- 5mm / 305+/-5mm
     Physical  Propetry                         Before Aging After Aging
     Tensile Strength 24Mpa    18Mpa (min)
     Stress at 500% elongation     5.5Mpa (MAX)                                                 
     Ultimate elongation 750% 560% (min)
     Sampling  Plan  ISO 2859, Manufactured in compliance with current GMP requirement. 
      AQL Inspection Level 
     Pinhole 1.5 G-1
     Major 2.5 G-1
     Minor 4.0 G-1
     Physical property&Dimensions  4.0  S-2 
     Reference Document: ASTM D3577-06

     

     

    1. This product contains nature rubber latex that may cause allergic reaction in some hypersensitive individual users.
    2. After donning, remove powder by wiping gloves thoroughly with a sterile wet sponge. sterile wet towel or other effective method
    3. Should be stored at goods shelf. 20cm off the floor. in a dry and well ventilated areas.
    4. Tempertures below 30℃(86℉) and 65% humidity.
    5. Aviod direct sunlight, heat, and high temperatures.
    6. Aviod direct lighting, heating, and electrical equipment.
    7. Avoid exposure to UV light Ozone.
  • 製品の包装

  • 製品認証

お問合せ